Wireless (WiFi) Networking

Small to Large scale residential & commercial WiFi Access Point installation types and scenarios.

Single WiFi Networking Access Point Solutions are typically installed in a centralized location within the home for enhanced WiFi connectivity coverage throughout the entire dwelling. For most small-scale networking deployments in a traditional residential application, one single WiFi Access Point is suitable for most coverage scenarios.

Multiple WiFi Networking Access Point Meshed Based Controller Solutions

Multiple WiFi Networking Access Point meshed based controller solutions typically contain a single WiFi Access Point installed in a centralized position on each floor of medium to larger sized home. These strategically placed Wireless Access Points provide seamless WiFi connectivity and meshed wireless roaming communication capabilities over a large square footage dwelling. This seamless WiFi connectivity coverage is achieved via an advanced dedicated networked controller based WiFi processing unit, which is installed in the head end networking equipment rack enclosure, directly connected to the internet modem or network switch.

Outdoor WiFi Access Point Solutions

Outdoor WiFi Access Point Solutions provide residential and business owners with the ability to expand their wireless internet coverage around the exterior perimeter of their house, business, office building, cottage, garages, outbuildings, Etc. Outdoor WiFi Access Points are designed to withstand the harsh environmental factors associated with exterior installation applications, while still providing the same performance and system functionality that a traditional indoor WiFi AP provides. Outdoor Wireless Access Points are also rain and dust resistant and can maintain stable wireless coverage and functionality over vast distances, suitable for system integrations that expereince wide temperature range flotations in most typical North American Canadian climates.

Wireless Meshing Access Point Solutions

Wireless Meshing Access Point Solutions provide the ability to integrate new WiFi AP’s into existing wireless networking systems that require enhanced wireless coverage in a new location that does not have the ability to physically hardwired the new access point to the existing infrastructures network switch. This unique WiFi meshing process is achieved by installing the new access point within an acceptable distance of a previously installed access point. This strategic installation proximity to an existing Access Point provides the new WiFi AP with the ability to establish a wireless mesh connection back to the existing Access Point that has a dedicated hardwired Ethernet connection back to the initial network switch. The newly implimented WiFi AP can then establish a virtual hardwired connection protocol between the physically hardwired WiFi AP, simply by utilizing a portion of the unused wireless spectrum to simulate a virtual Ethernet connection to feed the new Access Point location. This virtualization process allows the new WiFi AP to function essentially as a typical Access Point would, seamlessly with the entire existing wireless system (at a marginally reduced bandwidth, due to the fact that it required a portion of the exciting wireless spectrum allocated for uplink in order for the virtualization to function correctly). The only requirement needed for this meshing network to function correctly, is simply to supply power to the new WiFi AP via a PoE injector with a short jumper Ethernet cable, eliminating the need to physically hardwired the unit all the way back to the existing network.